5 notes to clean Electrolux front-load washing machine cleanly and simply

Skip to main content in article(see)

1. Periodic cleaning time of Electrolux front-loading washing machine

Washing machines, after a period of use, easily accumulate dirt and mold inside the washing drum and cannot escape, causing unpleasant odors or even plaque that will stick back to clothes. Therefore, after a period of regular use or depending on the frequency of using the washing machine, you should perform a general cleaning of the machine once to ensure the durability and washability of the product.

According to the recommendations of experts, the average time should be Clean Electrolux front-loading washing machine is once every 2-3 months. If you use the washing machine more often than a few times a day, you should shorten the cleaning time to once a month.

If cleaning the entire machine includes: Cleaning the outer washing drum, cleaning the inner washing drum, removing mold, etc., the cycle is about 1 – 1.5 years/time. In addition, after each wash, you should open the machine door for about 3-5 minutes to ensure the washing drum is completely dry, minimizing moisture that creates conditions for mold and bacteria to grow.

2. Signs that the Electrolux front-loading washing machine needs to be cleaned

In addition to periodic cleaning according to the above time, if your washing machine encounters one of the following signs, it also needs to be cleaned and maintained immediately:

• The machine runs weakly, slower than normal and makes more annoying noises than usual
• Clothes after washing are covered with green, blue-black plaque or have a musty smell
• When the machine starts the washing and rinsing cycle, the machine makes a loud noise and vibrates more strongly than usual
• Washing machines consume more electricity and water
• The washing machine suddenly shuts off midway through the washing cycle.

3. Tools need to be prepared for cleaning

The average time to clean a washing machine will take about 3 hours depending on the level of dirt and details of the machine’s structure. To Clean Electrolux front-loading washing machine Better yet without affecting quality, operability or avoiding rust on metal parts, you should use the following items according to the manufacturer’s instructions:

• Fine fiber cloth towel
• Warm soapy water
• Spray bottle
• Specialized washing drum cleaners or washing machine detergent tablets

Currently on the market there are many types of pre-mixed detergents with special formulas. Therefore, you should research carefully and choose genuine detergents to protect your machine from damage. Here are some quality detergents you can refer to:

• Hando washing drum cleaner: With ingredients sodium, surfactant, hypochlorite, and hydrogen peroxide to help clean up to 99% of bacteria and protect the washing drum from oxidation.
• Omo Matic detergent tablets: Convenient, easy-to-store tablets with powerful cleaning ingredients fatty acids, adipic acid, sodium sulfate and sodium carbonate and Ion-Boost swirl formula to help remove stains effectively and quickly.
• Weico bleach tablets: A famous Japanese product that has both cleaning effects and antibacterial and deodorizing support thanks to main ingredients including borate salts, carbonate salts and silver ions.

4. 5 steps to clean Electrolux front-load washing machine PROPERLY

Once you have prepared all the tools, you will now divide the process How to clean an Electrolux front-loading washing machine into 5 steps corresponding to 5 parts:

Step 1: Clean the outer shell

Although the outer shell does not greatly affect the operation of the machine, it directly affects the aesthetics. Normally, the outer shell of an Electrolux washing machine will be made of powder-coated metal. Therefore, you should only use a dry soft cloth to clean and do not need to use cleaning chemicals because it can peel off the protective paint layer.

Step 2: Clean the detergent box

After a period of use, detergent can accumulate in the grooves of the detergent box. To clean, you just need to disassemble the drawer and details and soak them in warm soapy water. Finally, use a toothbrush to scrub clean and dry before reinstalling.

Step 3: Clean the washing drum

This is an important step and should be done regularly. First you need to make sure you have taken all the clothes out. Next, use according to the dosage and instructions on the detergent packaging (tablets, powder or liquid) and use by putting directly into the washing drum or laundry detergent compartment.

If you don’t use a specialized detergent, you can also make your own bleach mixture by: Mix warm water with 2-3 cups of vinegar and 250g of baking soda. Then, put the solution into the washing drum and soak for 30 minutes.

Finally, run the washing machine through the tub cleaning cycle (for Electrolux front-loading washing machines with Tub Clean, Clean Washer cleaning modes) or a regular washing cycle and in hot water mode is the most optimal. (if any).

Step 4: Clean the front-load Electrolux washing machine door

Rubber door gaskets are susceptible to water stagnation, causing mold and mildew, and this is also a difficult location for washing machine cleaners to affect. To clean thoroughly, use a spray bottle and spray warm soapy water onto the gasket and turn the folds over for full access. Then, use a clean, dry towel to wipe again. Do the same with the glass door.

Step 5: Clean the pump and pump filter

First, make sure the washing machine is unplugged. Then find the location of the pump and discharge valve, usually located at the front. Next, place the water tray below and continue to remove the auxiliary drain pipe to drain the water. Remove the filter by turning it counterclockwise and pulling the filter out of the pump compartment. Finally, remove any trash, lint or clogged objects, and use a small toothbrush to clean them before reinstalling.

Note that before cleaning the water supply faucet and water filter before entering the washing machine, you should turn off the water supply faucet to the washing machine.

5. For in-depth cleaning of the Electrolux front-loading washing machine, you should hire a technician

For cases where you have used an Electrolux front-loading washing machine for a long time, about 2-3 years, you should hire a professional to clean the outer drum of the washing machine, as well as carry out maintenance and check specialized details. deeper.

Intensive cleaning will help your washing machine operate more stably, more durable, and avoid minor errors. However, this form of cleaning requires specialized knowledge and specialized tools, so the optimal solution is to hire a professional to do it. The price for cleaning an Electrolux front-load washing machine ranges from 550,000 – 850,000 VND depending on the volume and type of washing machine.